Heavy Equipment

Heavy Equipment
23 total products
  • $4250.00
    1 in stock
    Used very little. Like new condition! Muck-truck® is a Quarter Ton Power Motorized Wheelbarrow with 6cu ft. Skip/Bucket is in good working condition ready to use on a demanding project. Considered the Original Mini-Dumper, all of the Muck-truck power wheel barrow attachments are interchangeable in seconds and are easy to steer empty or fully loaded. Subtle, but handy feature of the Muck-Truck is that it can easily glide through the average 28” doorway. Power supplied by a Honda GXV 160 Commercial 5.5hp with a Transmission - 3 forward and 1 reverse. Performs at a Speed of 0-3.5 mph and holds a 6 cu/ft - 550lbs/250kgs carrying capacity with wheels - Front 400x10, 4 ply tractive and Rear 400x8, 4 ply tractive along with a disc parking brake. The Noise Rating is up to 79db.
  • $299.00
    Craftsman 6 1/8" Jointer Planer 113.20680 Mounted on stand. Missing a piece to stabilize the guide. Firm on price.
  • $3500.00
    1 in stock
    Screw Cutting And Turret Lathe, 3-Jaw Chuck, 3-Drawer Cabinet Base
  • $3250.00
    Horse Manure AirLite Pasture Cleaner is powered with a Briggs Stratton Engine 8.75 Engine and utilizes a 5-row brush unit and a set of spring tines to break up larger clumps of manure. Unit pulled by ATV, Riding Lawn Tractor or Gator. Barely been used.
  • $2250.00
    Conex Cosco Shipping Container Steel Dry 20 ft. x 8 ft. x 8 ft. manufactured by International Marine Containers, LTD. Rust spots shown in photos, doors and hinges in good working order.
  • $6550.00
    Wacker RD880V Vibrating Drum Asphalt Roller runs greats and fully operational. Briggs & Stratton Vanguard 16hp gas engine with Hydrostatic transmission. 36 inch wide Double Drum, with a weight of 2430 lb. 4-Corner Tie Downs and Meter Usage 372 Hours.
  • $2650.00
    1 in stock
    Good working. Vintage sod/asphalt roller; 28" front roller and 30" rear roller. This machine was originally an asphalt roller. It was modified to be used as a sod roller at a golf course. Has a Briggs & Stratton engine. It could be re-fitted with a replacement water tank and tubing to be used on asphalt, if so desired. Purchased at auction; do not have specific specs regarding brand or engine power.
  • $26000.00
    The 7210 is in good running condition with 2270 hours on meter includes 72" Mower Deck and 60" Sweeper Attachment and brand new plow. Spare rear summer tires; Spare Polar Track tire and 2" rear receiver hitch. Engine is a Kubota 3-cylinder diesel with a rating 26 kW, 35 hp turbo and liquid cooled. Tires and Polar Trac in good condition, engine runs good with a history of oil changes every 150 hours. Transmission is direct drive to engine and integrates dual wheel motor pumps with a hydraulic clutch directly mounted to engine. Steering utilizes adjustable twin sticks with high performance CYB hydraulic dampers. Instruments include a hour meter, glow plug, temperature, oil pressure and alternator. Polar Trac Cab is ROPS certified with tinted safety glass, includes heater/pressurizer, front wiper, dome light, upholstered interior and rubber isolator mounts and is good condition. Cab Light System displays work and road lights, turn signals, flashers and tail lamps. Fuel capacity 11.5 gal. with ground speed 0-8 mph. Attachment system is a quick-connect which allows swapping of attachments without tools. Available attachments (not included) include a 53" Snow Blower, 48" V-Plow, 60" Angled Snow Blade Cab Model: Toro Groundsmaster 7200/7210 ROPS Serial # 312000107 2012 Toro Groundsmaster Model #30370 Serial #312000221 VIN #30464312000194 M-B Companies Rotary Broom Serial #12-6178 M-B Companies 60 " Angled Snowplow
  • $385.00
    Like New Hobart Handler 140 Wire Feed MIG Welder with Cart. Weld 24 Gauge, up to 1/4" Steel.
  • $550.00
    Jet Tools Wood Bandsaw 14 in. Table Model JWBS-14OS running a Motor HP 3/4 with a Blade Speed 3,000 rpm. Graphite Blade Blocks impregnated polymer blade guides with roller bearing thrust guides provide quicker set-up and cooler running blade including Micro Adjust Blade Guides. 6" resaw capacity for cutting larger pieces of wood and 14"x14" cast iron table tilts 45° right and 10° left. Cast iron frame construction for strength, rigidity and reduced vibration and 4" dust port allows direct connection dust collection system. Precision computer balanced wheels eliminate vibration for accurate blade tracking along with graphite impregnated polymer blade guides with roller bearing thrust guides provide quicker set-up and cooler running blade. Cutting capacity width 13.5" and height 6".
  • $11500.00
    1 in stock
    Liebert Deluxe Systems VH model VH199AUCAEI5185. Maximum 199000 BTU/H water cooled AC unit. The Liebert Deluxe System improves data center efficiency and protection with advanced thermal controls and features. Minimum Supply Circuit Ampacity 140.9, Volts 208/360 and Pressure PSIG High 300 Low 150. Electric reheat and infrared humidifier.
  • $26500.00
    1 in stock
    Used paver in good condition. Everything works. Air-cooled Hatz 2M40 diesel engine. Four-stroke/cycle engine with 2 cylinders (26 kW / 35 HP). 540 hours on the meter. 12-volt electrical starting system with 50 amp alternator and new 12-volt Econo Power battery (installed 4/2022). Dual operator stations allow work from either side of the machine. Controls for steering, throttle, propulsion/stop, augers, screed, strike-off, mat thickness, and washdown spray. Two independently-driven hydrostatic 15 " wide all-steel tracks allow pivot turns and exceptional control in confined areas. Closed screed width is 110 " and fully opened screed width is 145 ". Screed pre-heat is by propane heater. Steel augers extend and retract. 6-ton hydraulic hopper with gravity feed. City owned and maintained its entire life.
  • $6500.00
    Liebert Deluxe Systems VH model VH127W CAEI3648. Maximum 127000 BTU/H water cooled AC unit. The Liebert Deluxe System improves data center efficiency and protection with advanced thermal controls and features. Minimum Supply Circuit Ampacity 98.5, Volts 208 and Pressure PSIG High 300 Low 150.A
  • $5500.00
    1 in stock
    Linde Electric Three Wheel Forklift E15-02 3300 LBS Capacity,10' 2 stage mast, Three wheel, Reconfigurd with 6 brand new 6 Volt batteries, 36 Volt, Comes with charger. ( Lift, Zero turn, Linde, Three wheeel, 36 Volt, Clark, Hyster, Forks, Pallet Forks, Lift, Lifts, Warehouse, Factory, Haul, Hauling, Move, Moving, Load, Loading, Stocking, Jack ) 4926 hours
  • $650.00
    1 in stock
    Hurst Performance Inc. (Jaws of Life) Hydraulic Jaw Spreader Power Rescue Tool
  • $25000.00
    1 in stock
    The 355 Tennant Rider Street Sweeper includes a heated cab, sliding door and windows providing excellent protection in harsh weather conditions. Tennant 355 Rider Street Sweeper with Cab and Heat. Hydrostatic drive, high dump hopper, and able to hold 1,400 lbs. of debris. includes paper, card board, tags, leaves, pallet chips, Sand, bottles, cans, leaves, dirt, gravel and small plastic parts. 60" combined sweeping path: 45" main broom - 23" side broom, Combustion Powered Gasoline engine, 74 square foot dust filter, 1200 maximum hopper weight - 14 cubic ft capacity and 80 dBa.
  • $1950.00
    Ryan Mataway LA28 Lawnaire Walk Behind Turf Aerator runs and operates well having been maintained by the City of Bloomington. Vertical coring action is offered by reciprocating tines that punch straight in and out without tearing the turf. Aerate up to 3.5 x 5" for 12 holes per sq. ft. and 24,0000 sq. ft. in one hour with max. depth 2.5". Zero-turn capability is offered with the front caster wheel to offer increased maneuverability for more productivity. Controls are located within easy reach of the operator position.
  • $375.00
    SpeedAire 1NNF6B 120v Air Compressor 135 PSI Max. Model 1NNF6B, 2.0 running HP - 20 Gallon Tank. 120v - 15A / 60hz, operates well and in good condition ready to use.
  • $19500.00
    1 in stock
    2005 Fecon Bobcat Bullfrog P33109 - This forrestry mulcher is Ideal for high flow skid ster Min flow is 24 gpm, Max flow is 45 gpm, to clear brush, trees and stumps down to ground level. Quickly mulching standing trees 4-6" in diameter (depending on horsepower) and intermittently process 6-8" trees. Working width is 61", Over width is 72", Welded on push bar, Curved skid shoes, (Mulcher, Skid ster attachment, Bobcat attachment, Brush, Clears, High flow, Push bar, Curved ski shoes, Fecon, Bull Hog)
  • $36500.00
    2008 Gehl SL7810E Skid loader One of the largest skid loaders available!, 3,850# capacity, 1,800 hours, 99 horse power Cummins diesel engine, High flow hydraulics 41 gallons per minute @ 3,300 psi, Heat and AC, 2 speed, Maintained every 200 hours, Comes with 72 inch bucket, Heavy duty machine with low hours.
23 total products